Item specifics
Item Type:
Speakers
Place of Origin:
Guangdong China (Mainland)
Brand Name:
FAE065
Model Name:
AEF036
Impedance:
4 ohms
Signal To Noise Ratio:
> 100dB
Frequency Range (Hz):
10HZ - 40kHz (-1dB )
Out Power:
170W x 2
Speakers Types:
Speakers Sets
Item Size:
40x20x8
Voltage:
12V
Audio Sensitivity:
100mV - 3V
Special Features:
Car Stereo
Car Make:
ALL
Color Name:
Silver
Item Weight:
4.0 kg
Item Type::
Amplifiers
Place of Origin::
Guangdong China (Mainland)
Audio Encoding::
Stereo
Brand Name::
http://www.aliexpress.com/fm-store/608535
Impedance::
4Ω
Signal To Noise Ratio::
75 - 90dB
Frequency Range (Hz)::
20Hz / 20KHz
Item Weight::
4 kg
warranty::
1year
sensitivity::
100mV - 3V
Product Description
Description
- Car amplifier supports soft start & Muting function
- Four class AB high-current dual discrete drive stages
- Class AB technology mosfet PWM power supply
- Car amplifier supports overload, thermal, short circuit protection function
- Bridgeable & Tri-mode operation
- Subwoofer variable crossover for deep bass control
- Gold plated RCA & power, speaker terminal
- Power & protection indicator
- Car amplifiers fuse rating: 40A x 1
- Power output4 ohms, 4 channels driven:
- 85W x 4 or 170W x 2
- 250W x 4 or 500W x 2 - Bridge Output4 OHM: 1000Watts
- Signal Noise Ratio: > 100dB
- Frequency Response: 10HZ - 40kHz (-1dB )
- Input sensitivity: 100mV - 3V
- Input impedance: 22K ohmvs
- Speaker impedance: 4 ohms
- High pass filter freq: 80HZ - 1.2KHZ
- Low pass filter freq: 40HZ - 150HZ
- Car amplifiers operation voltage (negative ground): DC 12V
- Approved: CE / FCC
- After Sales Service: 1 Year Warranty
- Never mount the car amplifier in a location that is subject to direct sunlight or exposed to moisture.
- Never mount the car amplifier up side down, this will cause the heat to rise back into the amplifier causing thermal shutdown or possible permanent damage.
- Be sure to mount the amplifiers to a strong, solid surface which will not give way under the stress of a sudden stop or accident.
- Negative battery terminal must be disconnected before any electrical connection are made.
- Be sure choose a location that provides substantial ventilation for the amplifier.
- The location chosen should provide at leat 2? of clearance above the amplifier for adequate ventilation.
- If the amplifier is to be mounted vertically be sure that it is in a place where adequate air will follow along the length of its heatsink fins for cooling.
- Make sure that the mounting screws will not penetrate the gas tank, brake and fuel lines, wiring or other critical parts of your car when installed.





Packaging Details
Unit Type:
piece
Package Weight:
4.0kg
Package Size:
40cm x 20cm x 8cm